ECO-SCALE PLUS

Description

A new type of scale remover ’Triple7 Eco-Scale Plus’ is now available from Envirosafe.

Triple7 Eco-Scale Plus is a completely new concept for scale removal that is easy to use, safe & non reactive.

Triple7 Eco-Scale Plus was developed with work-safety in mind, offering powerful limescale descaler performance without introducing dangerous acids into the workplace.

What is Triple7 Eco-Scale Plus

Triple7 Eco-Scale Plus is a versatile, highly concentrated surface cleaner for limescale and calcium removal. It is a non-corrosive liquid for scale removal in heat exchangers and pipework systems or wherever you have scale build up.

Triple7 Eco-Scale Plus’s unique surfactant technology effectively and easily removes limescale, with minimum downtime and without harming or corroding critical equipment. Due to its low corrosion formula and low flammability, Triple7 Eco-Scale Plus can often be used to remove calcium and limescale from equipment while it is in place. This drastically reduces labour costs, downtime and loss of production.

Unlike harsh caustic limescale removers, Triple7 Eco-Scale Plus is free of salts and strong acids; it produces a powerful cleaning action without damaging hard surfaces, seals, rubbers, equipment and pipework systems often associated with Mining, Oil and Gas equipment.

Triple7 Eco-Scale Plus’ powerful botanical formulation removes encrustation
from virtually any surface without the high corrosion experienced with standard alternatives.

Triple7 Eco-Scale Plus is your number one choice for descaling that is free of:

Caustics
Phosphates
Strong acids
Petroleum products
Terpenes
Glycol ethers
Ammonium compounds & oxalic acid
Due to the lack of above ingredients, it is suitable for use in confined spaces.

Uses:

Triple7 Eco-Scale Plus is designed for maximum limescale removal with minimum equipment downtime
Due to its low corrosion formula and low flammability, Triple7 Eco-Scale Plus can often be used to remove calcium and limescale from equipment while it is in place. This drastically reduces labour costs, down time and loss of production

Benefits:

A worksafe limescale cleaner
Environmentally responsible – contains no petro solvents, caustics, phosphates, strong acids, terpenes, glycol ethers, ammonium compounds & oxalic acid
Free of corrosive inorganic acids such as hydrochloric, phosphoric, oxalic and sulphuric acids
Contains no ozone depleting substances
Economical -1 litre of concentrate makes up to 10 litres of ready to use product
Effective in a wide range of applications
Suitable for use in confined spaces
Biodegradable
Cleans equipment without dismantling
Enhances system performance & reduces failure rates

Point of Difference:

A worksafe limescale cleaner – requires no PPE, contains no toxic or dangerous ingredients and can be disposed of without risk of environmental damage.
Environmentally Sustainable – A concentrated surfactant formulation derived
from readily renewable resources. The product contains no toxic ingredients and will not harm water, soil or air environments. 100% Biodegradable
Clean equipment without dismantling

Directions:

Standard Dilution Rates

For typical descaler applications dilute 1:10 (10%). For extreme scale build-ups a 1:3 (30%) dilution may be required.
Allow to stand or circulate for 1 to 6 hours, depending on degree of limescale removal required.
Rinse with fresh water

Heat Exchangers, Condensers & Chillers

Apply a 10% solution of Triple7 Eco-Scale Plus and allow to circulate for 8-16 hours.
Maintain a pH of less than 3.0 and then follow with a thorough water rinse.

Pipework

Flush with a 10% solution of Triple7 Eco-Scale Plus maintained at a pH less than 3.0 to remove limescale.

Dismantled Pumps and Parts

Place in container and cover with a 50:50 solution of Triple7 Eco-Scale Plus and water.
Monitor pH levels and add more Triple7 Eco-Scale Plus if the pH rises above 2.5.
If pH rises too high, discard the solution and recommence the cleaning with a new solution.
Rinse with water and reassemble.
This process can be completed in an agitated parts washer to speed up the cleaning process.

Assembled Submersible Pumps

Cover fully assembled pump with sufficient Triple7 Eco-Scale Plus solution (between 10% for 50%).
Run the pump.
Check regularly for overheating, and ensure the pH level is maintained below 2.5.
As the pH level rises, add more Triple7 Eco-Scale Plus.
Change liquid occasionally if needed.
Continue pumping until limescale is removed.
Rinse out, or pump through with water.